Russell 640471 Endura -3AN 10mm Banjo Fittings

Category : Automotive Parts and Accessories
Brand : Russell
Features

Has 45 degree endura finishing which acts as a corrosion resistant for long life

Available in SAE threads

Adapter fitting measures -3 AN

10mm straight adapter fitting

It is sold individually

Russell 660651 Endura -6AN Tube Sleeve Fitting - Set of 2

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Made from aluminum

Has an ultra-bright endura finish

-6 AN fitting for 3/8" tube

Comes as a pair

Offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components

Russell 660580 Blue Anodized Aluminum -8AN Tube Nut Fittings - Pack of 2

Category : Automotive Parts and Accessories
Brand : Russell
Features

Precision machined to ensure precise thread engagement

Lightweight aluminum fittings are designed to match up with all Russell performance hose and hose ends

Tube size is 1/2" with -8 AN

This wide variety of lightweight aluminum adapter fittings allow for the connection of hose ends to almost any component

A-Team Performance Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35

Category : Home Improvement
Brand : A-Team Performance
Features

1 x A-Team Performance Brake Line Fitting Kit for Inverted Flares on 3/16 and 1/4 Tube

For 3/16" tube there are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18)

For 1/4" tube there are 16 fittings included (12 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18)

Zinc Coated for corrosion resistance.

Many local parts stores rent out flaring tools free.

Utah Pneumatic Pack of 2 Nickel-Plated Brass Push to Connect Fittings 1/4"Od Tee Connect Union Push Fit Tube Fittings Pneumatic Fittings Air Line Fittings Tube Connector Push Tube Fittings

Category : Home Improvement
Brand : utah pneumatic
Features

Fluid Admitted: Air, Water, Steam Fit Air Lift 21838 Union Tee

Max Working Pressure: 1MPa | 150 psi/ Applicable: Pipe PU/PA/FEP/PFA push fitting

Working Temperature:-20°C—120°C | -4°F—248°F

Body:Nickel Plated Brass/Seal: O-ring FKM(Viton) push to connect air fittings assortment

Common Sizes:Metric Tube φD 4mm,6mm,8mm,10mm,12mm,14mm,16mm Inch Tube φD 1/4" 5/16" 3/8" 1/2"

Russell 640221 Endura -6AN Carburetor Adapter Fitting - Pack of 2

Category : Automotive Parts and Accessories
Brand : Russell
Features

Lightweight aluminum fittings are designed to match up with all Russell performance hose and hose ends

37 degree sealing angle guarantees a positive seal at maximum operating pressures

Fits best to Dual Feed Holley 750 through 1350 Dominator

Precision machined to ensure precise thread engagement

Coupler size is -6 AN

Edelbrock/Russell 640491 Endura GM Banjo to -3AN Fitting - Pack of 1

Category : Automotive Parts and Accessories
Brand : Russell
Features

Has 45 degree endura finishing which acts as a corrosion resistant for long life

Available in SAE threads

Adapter fitting measures -3 AN

7/16" bolt adapter fitting

The fitting material is made of steel and features a zinc finish

1/8 Npt Female Push To Connect Fittings,CEKER 1/4 Inch Air Tube Od Fittings 1/8 Air Fittings Pneumatic Fittings Air Line Fittings Quick Connect Air Hose Fittings 5Packs

Category : Tools
Brand : CEKER
Features

Type:1/4" Od x 1/8" NPT Female Push to Connect Fittings; Body Style: Female Straight

1/4 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing)

1/4 Air Line Quick Connect Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

1/4" od Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32～140°F

1/4" od Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32～140°F

1/4 NPT Elbow Push to Connect Fittings,CEKER 8MM Tube Od x 1/4" NPT Female Air Fittings Quick Connect Tube Fittings Pneumatic Fittings Push Lock Fittings Push in Connectors 2Packs

Category : BISS
Brand : CEKER
Features

Type:8MM Od x 1/4" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility

8mm Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32～140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly

Easy to install to 8mm OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely

The release ring of Pneumatic Air Tube 8mm od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property

Utah Pneumatic 10 Pack Plastic Push To Connect Air Line Air Ride Fittings Tube 3/8 Od Straight Push Fit Fittings Tube Fittings Push Lock (3/8 Straight)

Category : Home Improvement
Brand : utah pneumatic
Features

Type:air hose fittings/push fit/Push to connect Straight shape Weight: 2.7 ounces/Size:3/8 inch od

luid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect fitting water (no freezing)

Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC

Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel (SUS)/Body:Plastic(PET)

Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg

TAILONZ PNEUMATIC 304 Stainless Steel 10mm od Push to Connect Fittings Tube Elbow Connect Push Fit Fittings Tube Fittings Push Lock PV-10 (Pack of 1)

Category : BISS
Brand : TAILONZ PNEUMATIC
Features

【Product Name】Elbow Shape Tube Fittings Push Lock

【Material】304 Stainless Steel

【Size】10mm OD

【Maximum Pressure】0~200Psi【Working Temperature】-4～392°F

【Features】Control the connection and disconnection of pipes.

Utah Pneumatic Push To Connect Air Line Fittings 1/4"Od Straight Union Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (2 Pack)

Category : Home Improvement
Brand : utah pneumatic
Features

SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting

Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly

Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape

It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes ; this enhances the installation of the push connect fittings process in a narrow space

These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Connect It Fittings We Are Committed To Quality Of Our Air Fittings

Utah Pneumatic Push To Connect Air Line Fittings 1/4"Od Straight Union Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

Category : Home Improvement
Brand : Utah Pneumatic
Features

SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting

Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly

Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape

It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes ; this enhances the installation of the push connect fittings process in a narrow space

These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Connect It Fittings We Are Committed To Quality Of Our Air Fittings And If For Some Reason You Will Not Be Satisfied With Our Quick Connect Hose Fittings Money Back Guaranteed

mxuteuk 2pcs Push to Connect Tube Fittings Copper Pneumatic fittings Male Straight push in air hose fittings 3/8" Tube OD x 1/2" NPT Thread

Category : Home Improvement
Brand : mxuteuk
Features

【Type】Male Straight, Size: 3/8" Tube OD x 1/2" NPT Thread

【Fluid Type】air, vacuum; Working Pressure:0-1.0mpa | 0-181psi.

【Working Temperature】0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC

【Material】mxuteuk Pneumatic fittings are Made of quality plastic and stainless steel for durable use; Easy to install and removed, offering good seal property，the joint can 360 degree rotation，Simple and dexterous；

【Package Content】2pcs x Straight Push-in Connect Fittings

mxuteuk 2pcs Push to Connect Tube Fittings Copper Pneumatic fittings Male Straight push in air hose fittings 3/8" Tube OD x 1/8" NPT Thread

Category : Home Improvement
Brand : mxuteuk
Features

【Type】Male Straight, Size: 3/8" Tube OD x 1/8" NPT Thread

【Fluid Type】air, vacuum; Working Pressure:0-1.0mpa | 0-163psi.

【Working Temperature】0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC

【Material】mxuteuk Pneumatic fittings are Made of quality plastic and stainless steel for durable use; Easy to install and removed, offering good seal property，the joint can 360 degree rotation，Simple and dexterous；

【Package Content】2pcs x Straight Push-in Connect Fittings

10MM OD Tubing Push to Connect Fitting Elbow,CEKER 1/4NPT Female Air Fittings 1/4 inch Npt Air Lines Fittings 90 Degree Quick Connect Fittings Push Lock Tube Fittings Pneumatic Fittings 2Packs

Category : BISS
Brand : CEKER
Features

Type:10MM Od x 1/4" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility

10mm Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32～140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg

The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly

Easy to install to 10mm OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely

The release ring of Pneumatic Air Tube 10mm od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock (1/4 inch tee)

Category : Home Improvement
Brand : utah pneumatic
Features

Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.7 ounces/Size:1/4 inch od

Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect fitting water (no freezing)

Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC

Proof Pressure:| 120psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel (SUS)/Body:Plastic(PET)

Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg

Russell 661871 Endura -3AN Bulkhead Nut

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Precision machined to ensure accurate thread engagement

Provides maximum protection against corrosion

37 degree sealing angle guarantees a positive seal at maximum operating pressures

Thread size is 3/8"-24 to -3 AN

Ultra-bright endura finish

Fit type: Vehicle Specific

Utah Pneumatic 10 Pack Nylon & Nickel-Plated Brass Push to Connect Fittings Pc Male Straight 1/4"Od 1/4"Npt Thread Straight Connect Push Fit Fittings Tube Fittings Pneumatic Fittings (1/4od1/4npt)

Category : Home Improvement
Brand : utah pneumatic
Features

Type:Push In Male Connector. Size:1/4” Tube OD 1/4”NPT. Weight:18.5g

Fluid Admitted:Air, Vacuum, Water (No Freezing)

Working Pressure:0-1.0mpa | 0-150psi. Proof Pressure:3.0Mpa | 435psi

Negative Pressure-100Kpa | -29.5 In Hg. Body:Nickel Plated Brass Seal, O-Ring NBR

Working Temperature: 0-60°C | 32～140°F. Applicable Tube:PU / PA / PE / PVC

TAILONZ PNEUMATIC 1/4 Inch OD Copper Nickel Plating Straight Union Connect air Fittings Quick Connect Push Lock Fittings Pneumatic Fittings Tube connectors PU-1/4 (Pack of 10)

Category : BISS
Brand : TAILONZ PNEUMATIC
Features

【Product Name】 Straight Tube Fittings Push Lock

【Material】Copper nickel plating

【Size】1/4" Tube OD x 1/4" Tube OD

【Maximum Pressure】290Psi【Working Temperature】32～140°F

【Applicable Tube】PU / PA / PE / PVC.

Utah Pneumatic Push-To-Connect Air Line Tube Fittings 4mm Or 5/32 Od Straight Union Fittings Quick Connect Fittings Pneumatic Connectors (5 Pack)

Category : Home Improvement
Brand : utah pneumatic
Features

utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings

Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly

You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape

All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned

At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings

Russell 661021 Endura -6AN Flare Tee Adapter Fitting

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.

Edelbrock facilities have earned the world recognized ISO 9001:2008 registration for quality.

Fit type: Vehicle Specific

Russell by Edelbrock 620401 ENDURA HOSE END, # 6 - STRAIGHT

Category : Automotive Parts and Accessories
Brand : Russell by Edelbrock
Features

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.

Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality.

Fit type: Vehicle Specific

Russell 640001 Endura -6AN Straight Swivel Coupler

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Precision machined to ensure accurate thread engagement

Straight swivel coupler with an endura finish

Available for AN and NPT thread applications

Made of aluminum with a nickel plated finish

Female thread attachment size is -6 AN

Fit type: Vehicle Specific

Russell 655022 Endura -3AN to Straight-3AN 90-Degree Hose - 12"

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Better braking performance and a firmer pedal feel

Virtually any hydraulic brake or clutch system may be fitted

Unique endura finish is corrosion resistant for long life

12'' in length

Stainless steel braid eliminates the hose expansion

Russell 660351 Endura -6AN Flare Union Adapter

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket they live it and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.

Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality.

Russell 660991 Endura -3 AN Flare Tee Adapter Fitting

Category : Automotive Parts and Accessories
Brand : Edelbrock
Features

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.

Edelbrock facilities have earned the world recognized ISO 9001:2008 registration for quality.

Fit type: Vehicle Specific

Russell -6 AN 45 Degree Swivel Hose End - Endura R10091

Category : Automotive Parts and Accessories
Brand : RUSSELL
Features

Hose ends and adapter fittings are available in two finishes, black anodized and Endura; Endura simulates the appearance of stainless steel

Russell by Edelbrock 620131 ENDURA HOSE END, # 3 STRAIGHT

Category : Automotive Parts and Accessories
Brand : Russell by Edelbrock
Features

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.

Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality.

Fit type: Vehicle Specific

10 Pack Push to Connect Tube Fitting, Air Tool Fittings Straight Push Quick Release Connectors Tube Quick Connect Fittings, Male Straight 1/4" Tube OD x 1/8" NPT Thread

Category : BISS
Brand : Yarrkc
Features

Type: Male Straight, Size: 1/4" Tube OD x 1/8" NPT Thread

Made of quality plastic and stainless steel for durable use

Easy to install and removed, offering good seal property

Fluid Type: air, vacuum; Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa); Working Temperature: 0-60°C | 32～140°F; Negative Pressure: -100Kpa| -29.5 In H

Applicable Tube: PU/ PA/ PE/ PVC